Galvanized Ridge Cap Zinc Roofing Sheet Roll Forming Machine

Model NO.: WLFM Condition: New Thickness: 0.3 mm to 0.7mm. Hydraulic Station Power: 3 Kw. Cover Width: 382mm. Roll Forming Speed: 12 M/Minute. Coil Inner Diameter: 508mm. Trademark: WILLING Specification: CE& ISO Certification: CE, ISO Customized: Customized Main Motor Power: 4 Kw. Feeding Width: 500mm. Yield Stress: 235MPa (33ksi) ~ 345MPa (50ksi). Manual Uncoiler: Max. Capacity: 3000kgs. Voltage: as Per Customer’s Request. Transport Package: Wooden Cases Origin: China Automatic Self Locking Cap Machine
Components of the Machine:
The Roll Forming Machine consists of manual uncoiler, infeed guide, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table.
 

Process Sketch:
Uncoiling the sheet ---- Infeed guiding ---- Roll forming ---- Measure length
Cutting the panel ---- panels to the supporter.

  
 

Shipping Documents: 
1) Bill of Lading, one full set; 2) Commercial invoice, triplication, 3) Packing list, triplication.

 Component and Function: 

Coil Feeding Equipment					Consists of one uncoiler with capacity of 5 tons and its base. The steel sheet is manually fed to the guiding equipment under the function of friction and traction.
Infeed Guide					Adopting guiding bar and sliding block (sheet lubricator) to control the width and position of the steel sheet. The coil sheet is guided in the correct position and passed to the Roll Forming Equipment.
Mainframe Transmission					Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet.ition and passed to the roll forming equipment.
Roll Forming Stationt.					The main frame of machine is welded separately and the outside wall is connected by screw after being roto blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool. The tooling is PLC precision machined and supported with pre-lubricated rolling contact bearings.
Post-cut Equipment					Stationary hydraulic post shear/guillotine. The length and quantity of pieces can be set by the buyer through the control console, when reach the set length, the machine will cut the panel automatically. The cutting is finished under the power of hydraulic station which guarantees the precision of cutting.
Pressing Die System					To make pressing die for the steel sheet after roll formed, the shape of corrugated sheet will be pressed into steps. The distance of step length can be adjusted.e power of hydraulic station which guarantees the precision of cutting.
Hydraulic Station					Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.length can be adjusted.e power of hydraulic station which guarantees the precision of cutting.
PLC Control Console					The electric controlling system of this machine consists of five parts: operating system, touch screen, PLC, transducer and strong electricity parts. The controlling system of this machine is imported from Siemens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosenoperation by manual or automatically.ystem, touch screen, PLC, transducer and strong electricity parts. The controlling system of this machine is imported from Siemens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosenoperation by manual or automatically.ystem, touch screen, PLC, transducer and strong electricity parts. The controlling system of this machine is imported from Siemens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosenoperation by manual or automatically.ystem, touch screen, PLC, transducer and strong electricity parts. The controlling system of this machine is imported from Siemens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosen operation by manual or automatically.gth 2 meters; it can support panels with more than 4 meters in normal condition.ens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosen operation by manual or automatically.
Product Support Table					To support the finished run out panels. The quantity we supply is 2 pieces with length 2 meters; it can support panels with more than 4 meters in normal condition.ens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosen

  
 
We are a manufacturer in China,
we can make  machine as per as your request.
 
About the machine,
we need you to provide us informaton,
1. profile drawing and size of product (model), 
2. steel thickness range,
3. coil width,
4. steel stress, 
5. requirements for configuration.
 
FAQ:
1) Q: Are you manufacturer or trading company?
A: We are manufacturer and trading company.
 
2) Q: Do you provide installing and training overseas?
A: As per the buyer's request, we provide overseas machine installation, commissioning, and worker training. 
 
3) Q: How is your after sales support? 
A: We provide technical support on line as well as overseas services by skillful technicians. 
 
4) Q: How does your factory do regarding quality control? 
A: Our company has a strictly quality control policy which complies with ISO and CE standard. Every machine has to past testing running before it's packed for shipment.
 
5) How can I trust you that machines pasted testing running before shipping?
A:  1) We record the testing video for your reference. Or,
    2) We welcome your visit us and test machine by yourself in our factory.
 
6) Q: Do you sell only standard machines?
A: We provide standard machine, and we also accept OEM orders.  

For price and other details, we welcome you to inquire us. 

  
Please Contact Miss Lucy
 
 
  
 

Contact us if you need more details on Tile Making Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Construction Machine、Star Tray Type Automatic Locking Cap Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Other Roll Formers